GAMMA 6900 Els STRINGING MACHINE 2 POINT SC MOUNTING (Issue 4B - February 2014) - Manual (Page 15)

16
ADDITIONAL FEATURES
Completing the String Job
Once the fi nal cross string is tensioned and
clamped, tie off at the appropriate hole speci-
fi ed by the racquet manufacturer. Remove the
frame from the mounting system by releasing
the racquet holddowns and loosening the
mounting stands.
STRINGING THE FRAME
Locking the Turntable
The turntable may be locked in any position.
Rotate the lever down to lock the turntable
and up to release the turntable.