Silent mode – Directed Electronics AVITAL 3300L User Manual

Page 26

To disarm the security system,

DRW-35

turn the ignition to the ON posi-
tion. Press the Valet button

within 15 seconds. After five
seconds, the sys tem will disarm. If
the system does not disarm, you
may have waited too long; turn
the ignition off and on and try
again.

Location of Valet Button_________________________________

silent mode

To temporarily turn off the arm or disarm chirps, use Silent
Mode™. Simply press

DRW-226

for less than one second before

arming or disarming, and the confirmation chirp(s) will be elimi-
nated for that one op er a tion only. If you want the arm/disarm
chirps turned off permanently, your dealer can do this for you.

note: The Warn Away

response to lighter impacts is

bypassed if the system is armed using Silent Mode.
This ensures that no chirps will be emitted by the
siren in an area you want chirp-free. The system is still
fully capable of triggering by heavy impacts. Only the
Warn Away

response is bypassed.