DirecTV HIRD-E11 - Manual (Page 66)

DIRECTV PLUS SYSTEM FROM HUGHES NETWORK SYSTEMS - OWNER’S MANUAL
P AGE 7-10
Demo Mode
The Demo Mode is a feature that is primarily intended for in-store presentations. When enabled, the
digital satellite receiver will step through a variety of features and display messages decribing these
features. While pressing any key will allow you to regain operation of your digital satellite receiver,
this is only temporary. After several minutes of non-interaction, the demonstration will begin again. To
stop the demonstration mode permanently, disable the Demo Mode via this button.
Factory Defaults
If you ever want to reset the digital satellite receiver preferences, select the Factory Defaults button.
Limits
The LIMITS screen provides settings to help you control the viewing restrictions of satellite
programming. These limits, when accompanied by the CHANNEL
LISTS, put a great degree of control in your hands.
For the TV Timer, Rating and Spending limits to be enforced,
the digital satellite receiver must be locked, as described earlier
in this chapter.
Places to go from the LIMITS screen
TV Timer
The TV Timer is only available on the HIRD-E2 digital satellite receiver.
When you select TV Allow, the TV TIMER screen will be
presented. If your receiver is locked, you will need to enter your
passcode to access this screen.
From the TV TIMER screen you can specify the hours that satellite
programming can be viewed on your receiver. This is done by
highlighting each of the days you wish to control and pressing
. After selecting a day of the week, you can set an acceptable
start and end viewing period or a total viewing duration.
The LIMITS screen
The TV TIMER screen