Fronius String Control 250/30 DCD DF - Manual (Page 61)

59
EN
Installing the Fronius String Control 250/30 DCD DF
Installing the Fronius String Control 250/30
DCD DF
Selecting wall
plugs and screws Different wall plugs and screws are needed to install the Fronius String Control 250/30
DCD DF depending on the wall surface. As a result, wall plugs and screws are not supplied
as standard with the Fronius String Control 250/30 DCD DF. The installer is responsible
for selecting the right wall plugs and screws.
Installation posi-
tion The Fronius String Control 250/30 DCD DF can be installed in any position between the
horizontal and vertical.
However, the cable entries and outlets must always be positioned pointing downwards.
Selecting a loca-
tion Take the following criteria into account when selecting the location:
-
Install only on a solid, level surface; the housing must not distort when tightened
- The ambient temperature must not be less than -25 °C or more than +55 °C
- IP 55 degree of protection means that the Fronius String Control 250/30 DCD DF can
be installed outside and exposed to a certain amount of moisture. However, we rec-
ommend that the device is not exposed directly to moisture.
- Protect from direct sunlight and exposure to the elements
- Install beneath the solar modules if possible
Installing the
Fronius String
Control 250/30
DCD DF
1 2