Foxconn G45M - Manual (Page 83)

5
76
1. Find a PC, put a diskette into its floppy
drive A:, this diskette will be formatted later.
Put the driver CD into CD/DVD-ROM drive.
2. Depending on which platform your
system is, normally, it is a 32-bit XP sys-
tem. Use Windows explorer, and go to
CD:\Driver\Intel\RAID\floppy\32bit, click
on RaidTool icon to start the creation.
3. Click on “GO” to Start.
4. Select the desired destination FDD drive.
It can be the default drive A: or any USB
FDD. Click “OK” to continue.
5. Insert a diskette, click “OK” to continue.
6. You can input a volume label for this dis-
kette, click on “Start” to format.
7. Click on "OK" to go through this warning
5-1 Create a RAID driver diskette
If you want to install a brand new Windows XP on a AHCI or RAID system, you need to
configure the SATA Mode in BIOS to either AHCI or RAID first. You also need to create
a RAID driver diskette for use in installing your Windows XP system.
Windows Vista has native RAID driver in itself, you can skip these steps.