Foxconn Z75M-S - Manual (Page 36)

3
29
value is [20 sec].
► Device reset time-out
This item is used to select the USB mass storage device start unit command time-out. Default
value is [20 sec].
► Device power-up delay
This item is used to set the maximum time the device will take before it can report itself to the
host controller.
[Auto] : This is default option. For a root port, the default time is 100ms. For a hub port, the
delay is taken from hub descriptor.
[Manual]: you can change the time you want by the following item.
Tusted Computing
► TCG/TPM Support
TPM (Trusted Platform Module) is a specification promoted by TCG. A Trusted Platform Mod
ule offers facilities for secure generation of cryptographic keys.
The TPM Work Group is chartered to create the Trusted Platform Module (TPM) specifica-
tion. The definition of the TPM architecture comes from the TC and the TPM Work Group
defines the implementation of that architecture. Work group members should have a working
knowledge of security in relation to the design and usage of cryptographic modules. Members
should also have a working knowledge of cryptographic techniques including public-key cryp-
tography, cryptographic algorithms and protocols.
This item is used to enable/disable the function of TPM support.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Configuration
TPM SUPPORT [Disabled]
Current Status Information
No Security Device Found
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enables Legacy USB support.
AUTO option disables legacy
support if no USB devices are
connected. DISABLE option will
keep USB devices available
only for EFI applications.
Advanced