Foxconn Z75M-S - Manual (Page 31)

3
24
► LAN Controller
This item is used to enable or disable the onboard LAN controller.
► Azalia HD Audio
This item is used to enable or disable the Azalia HD Audio Controller.
► Serial Port
This item is used to enable or disable serial port (COM1).
► Change Serial Port Setting
This item is used to select an optimal setting for super IO device.
► CIR Controller
This item is used to Enable or Disable CIR Controller.
► Change CIR Port Settings
This item is used to select an optimal setting for super IO device.
Chipset Configuration
► Primary Display
This item is used to select which graphics controller is used as the primary boot device.
► Integrated Graphics
This item allows you to determine whether to allocate memory for the integrated graphics
controller from the system memory.
► Aperture Size
This item is used to select the aperture size.
► GTT Size
This item is used to select the GTT size.
► ME Flash Write Protected
This item is used to enable or disable the ME flash write protected control.
► Intel(R) Rapid Start Technology
This item is used to enable or disable the Intel(R) Rapid Start Technology.
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Chipset Configuration
Primary Display [Auto]
Integrated Graphics [Auto]
Aperture Size [256MB]
GTT Size [2MB]
ME Flash Write Protected [Enabled]
▶ Intel(R) Rapid Start Technology
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
Select which of IGFX/PEG/PCI
Graphics device should be
Primary Display Or select SG
for Switchable Gfx.
Advanced