beautypg.com

Exit – Foxconn H67MP Series User Manual

Page 46

background image

3

39

Exit


Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.

Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.

Main F-Center Advanced Boot Power Health Security

Save Changes and Reset

Discard Changes and Reset

Restore Defaults

Boot Override

→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values

F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Reset system setup after saving

the changes.

Exit

► Save Changes and Reset

If you select this option and press , a message will be displayed in the screen.
Select [Yes] to save your changes and reset computer, select [No] or to return to the
main menu.

► Discard Changes and Reset

If you select this option and press , a message will be displayed in the screen.
Select [Yes] to exit setup utility and reset computer without saving your modifications, select
[No] or to return to the main menu.

► Restore Defaults

Optimal defaults are the best settings of this motherboard.
Always load the Optimal defaults after updating the BIOS or after clearing the CMOS values.
Select this option and press Enter, it will pop out a dialogue box to let you load the defaults.
Select and then press to load the defaults. Select and press , it
will not load.
By this default, BIOS have set the optimal performance parameters of system to improve the
performances of system components. But if the optimal performance parameters to be set
cannot be supported by your hardware devices (for example, too many expansion cards were
installed), the system might fail to work.

► Boot Override

BIOS auto detect the presence of connected devices, select the device you want to boot from
and press , then the system will directly boot from the selected devices.