Foxconn H67MP Series - Manual (Page 43)

3
36
Power
Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main F-Center Advanced Boot Power Health Security Exit
ACPI Sleep State [S3]
Resume By PS2 Keyboard
[Enabled]
Resume By PS2 Mouse [Enabled]
Resume By USB Device(s) [Enabled]
Resume By PCIE Device(s) [Disabled]
Resume By Onboard LAN [Disabled]
Resume By RTC [Disabled]
Energy-using Products [Enabled]
Restore AC Power Loss [Power Off]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select the highest ACPI sleep
state the system will enter
when the SUSPEND button is
pressed.
Power
► ACPI Sleep State
This item is used to set the energy saving mode of the ACPI function. When you select “S1
(POS)” mode, the power is always on and computer can be resumed at any time. When
you select “S3 (STR)” mode, the power will be down after a period of time. The status of the
computer before it entering STR will be saved in memory, and the computer can quickly return
to previous state when the STR function wakes.
► Resume by PS2 Keyboard
This item is used to enable/disable the PS2 keyboard to generate a wake up.
► Resume by PS2 Mouse
This item is used to enable/disable the PS2 mouse to generate a wake up.
► Resume by USB Device(s)
This item is used to wake up the system by a USB device when it is staying at S3 state.
► Resume by PCIE Device(s)
This item is used to enable or disable the PCI Express device to generate a wake up.
► Resume by Onboard LAN
This item is used to enable or disable the onboard LAN to generate a wake up.
► Resume by RTC
Enable or disable System wake on alarm event. When enabled, System will wake on the day
hr::min::sec specified.
RTC is system real time clock.
► Energy-using Products
This item is used to enable or disable the EuP(Energy-using Products) feature. When enable,
the suspend power of the chipset will be cut off in S5 suspend mode in order to reduce the
power consumption of motherboard.
Enabled: S1/S3/S4 is normal, S5 wake up only by pressing the power button.
Disabled: Normal ACPI function.
► Restore AC Power Loss
This item is used to set which state the PC will take with when it resumes after an AC power
loss.