Foxconn H67MP Series - Manual (Page 32)

3
25
► Smart Power LED
Smart Power LED is a feature built on your motherboard to indicate different states during
Power-On Self-Test (POST). The LED is located at the front panel, and it displays POST state
by different long-short blinking intervals. You can always leave this state
enabled.
► Smart Boot Menu
When PC starts, it will ask you to press [Del] key to enter setup or press [F7] key to enter
smart boot menu. If [Disabled] is selected, then pressing [F7] has no function. This also pre-
vents user without password trying to get into your computer through smart boot menu.
Fox Intelligent Stepping
► Spread Spectrum
If you enabled this function, it can significantly reduce the EMI (Electromagnetic Interference)
generated by the system, so to comply with FCC regulation. But if overclocking is activated,
you had better disable it.
► VCC_SA Voltage
This item is used to change the VCC_SA voltage.
► Memory Voltage
This item is used to change the memeory voltage.
Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
F-Center
Spread Spectrum [Enabled]
VCC_SA Voltage [Default]
Memory Voltage [Default]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Spread Spectrum Settings
F-Center