Foxconn H67MP Series - Manual (Page 44)

3
37
Health
Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main F-Center Advanced Boot Power Health Security Exit
Case Open Warning [Disabled]
CPU Temperature : +35 ˚C
System Temperature : +29 ˚C
CPU Fan Speed : 3600 RPM
System Fan Speed : 2636 RPM
CPUVcore : +1.092 V
VDDR : +1.572 V
+12V SYS : +11.868 V
+5V SYS : +5.125 V
VBAT : +3.120 V
CPU Warning Temperature [Disabled]
CPU Shutdown Temperature [Disabled]
CPU Smart Fan Control [Disabled]
System Smart Fan Control [Disabled]
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enabled Case Open Warning and
open chassis,Intrusion Alarm
will appear. If don’t enter
bios setup and disabled Case
Open Warning one time, Instru-
sion Alarm don’t clear,it will
appear all the time.
Health
► Case Open Warning
This item is used to enable or disable case open warning function.
► CPU Warning Temperature
This option is used to set the warning temperature for the system. When the temperature of
CPU is higher than the set value, the motherboard will send out warning information.
► CPU Shutdown Temperature
This item is used to set the system temperature upper limit. When the temperature exceeds
the set value, the system will shut down automatically.
This function works only when your operating system is supporting ACPI.
► CPU Smart Fan Control
This option is used to enable or disable CPU smart fan function. Default value is [Disabled].
► System Smart Fan Control
This option is used to enable or disable systrm smart fan function. Default value is [Disabled].