Foxconn D180S - Manual (Page 39)

BIOS SETUP
32
Health
Case Open Warning [Disabled]
CPU Temperature : +84 ˚C
System Temperature : +35 ˚C
CPU Fan Speed : 4066 RPM
System Fan Speed : N/A
+12V SYS : +12.300 V
+5V SYS : +5.097 V
CPU Vcore : +0.864 V
VDDR : +1.524V
VBAT : +1.080 V
CPU Shutdowm Temperature [Enabled]
CPU Smart Fan Control [Enabled]
CPU Fan Stop Temperature 0
CPU Fan Start Temperature 35
CPU Fan Start PWM Value 120
CPU Fan Slope PWM Value 3
CPU Fan Delta Temperature 2
System Smart Fan Control [Disabled]
Enabled Case Opening Warn-
ing and open chassis,
Instruction Alarm will
appear. If don’t enter
bios setup and disabled
Case Opening Warning one
time, Instruction Alarm
don’t clear, it will
appear all the time.
→ ←: Select Screen
↑ ↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Main Advanced Boot Power Health Security f-center Save&exit
► Case Open Warning
This item is used to enable or disable case open warning function.
► CPU Shutdown Temperature
This item is used to set the system temperature upper limit. When the temperature exceed-
sthe set value, the system will shut down automatically.This function works only when your
operating system is supporting ACPI.
► CPU Smart Fan Control
This option is used to enable or disable CPU smart fan function. Default value is [Disabled].
► CPU Fan Stop Temperature
This item is used to set CPU fan stop temperature.
► CPU Fan Start Temperature
This item is used to set CPU fan start temperature.
► CPU Fan Start PWM Value
This item is used to set CPU fan start PWM value.
► CPU Fan Slope PWM Value
This item is used to set CPU fan slope PWM value.
► CPU Fan Delta Temperature
This item is used to set CPU fan delta temperature.
► System Smart Fan Control
This option is used to enable or disable system smart fan function.