Foxconn D180S - Manual (Page 33)

BIOS SETUP
26
► Onboard USB Controller
This item is used to enable or disable the onboard USB controller.
► Legacy USB Support
This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to enabled.
[Enabled]: This option will enable the legacy USB support.
[Disabled]: This option will keep USB devices available only for EFI applications.
► USB3.0 Support
This item is used to enable or disable USB3.0(XHCI) Controller support.
► Azalia HD Audio controller
This item is used to enable or disable the Azalia HD Audio Controller.
SATA Configuration
SATA Configuration
Onboard SATA Controller [Enabled]
Onboard SATA Mode [Native IDE]
Serial-ATA Port 1 [Enabled]
Serial-ATA Port 2 [Enabled]
SATA Port0
Not Present
SATA Port1
Not Present
Enable/Disable Serial ATA
→ ←: Select Screen
↑ ↓/Click: Select Item
Enter/Dbl Click: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Main Advanced Boot Power Health Security f-center Save&exit
► Onboard SATA Controller
This item is used to enable or disable the onboard SATA controller.
► Onboard SATA Mode
This item is used to set the operating mode of your SATA ports.
[Native IDE] - This configures the SATA ports to support native IDE mode.
[AHCI] - The Advanced Host Controller Interface (AHCI) specification describes the register
level interface for a Host Controller for Serial ATA. The specification includes a description of
the hardware/software interface between system software and the host controller hardware.
AHCI provides more advanced features including SATA features, but some SATA drives may
not support AHCI, unless they are labeled with AHCI support in its specification.
If your motherboard supporting AHCI, and you have a SATA device, which also supports
AHCI, then you can select IDE option to have fair performance (only PATA, SATA level), or
you can select AHCI to get its best performance.
► Serial-ATA Port 1/2
This item is used to enable or disable the Serial ATA Port 1/2.