Foxconn A6GMV - Manual (Page 73)

5
66
5-2 Install SATA Hard Disks
1. Shut down your computer.
2. Install SATA hard disks into the drive bays.
3. Connect all the SATA power and SATA data cables.
5-3 RAID Configuration
This motherboard supports RAID 0, RAID 1, RAID10 functions.
Hardware and software you may need here :
■ A floppy drive ■ A DVD-ROM drive
■ A floppy disk(Or USB disk for Vista) ■ A motherboard driver CD
■ Several SATA hard disks ■ Windows XP or Vista Install CD
RAID enable in bIoS
1. Boot up your computer, enter the BIOS setup by pressing [Del] key during POST.
2. Set the “OnChip SATA Type” to "RAID".
3. Press [F10] to save the setting, then PC will reboot itself.
option RoM Utility
When PC is rebooting, press [Ctrl-F] key during POST to enter the main menu of the Option ROM
Utility.
View Drive Assignment: To view the disk drive assignment status by pressing [1].
Define LD: To Create RAID by pressing [2].
Delete lD: To Delete RAID by pressing [3].
Controller Configuration: To view the SATA controller configuration by pressing [4].
exit: Press [Esc] to exit AMD Option ROM Utility.
Option ROM Utility (c) 2008 Advanced Micro Devices, Inc.
View Drive Assignment. . . . . . . [ 1 ]
Define LD . . . . . . . . . . . . . . . . . [ 2 ]
Delete LD . . . . . . . . . . . . . . . . . [ 3 ]
Controller Configuration . . . . . . [ 4 ]
[ Main Menu ]
Press 1..4 to Select Option [ESC] Exit
[ Keys Available ]