Foxconn A6GMV - Manual (Page 39)

3
32
USB Configuration
► USB Controller
This item is used to enable or disable the Universal Host Controller Interface for USB.
► USB 2.0 EHCI Controller
This item is used to enable or disable the USB 2.0 EHCI Controller
► Legacy USB Support
This item is used to enable the support for USB devices on legacy OS. If you have a USB
keyboard or mouse, set to auto or enabled.
► USB 2.0 Controller Mode
This item is used to set the transmission rate mode of USB 2.0. The available settings are :
[High Speed] in 480Mbps; [Full Speed] in 12Mbps.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
USB Configuration
USB Configuration Help Item
Module Version - 2.24.2-13.4
USB Devices Enabled: Disabled
None Enabled
USB Controller [Enabled]
USB 2.0 EHCI Controller [Enabled]
Legacy USB Suppprt [Enabled]
USB 2.0 Controller Mode [FullSpeed]
↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help
F9:Optimized Defaults
[Enabled]
Options