Foxconn 520A User Manual
Page 27
Chapter 2 BIOS Description
22
Use
time and date.
1.2 IDE Channel 0 Master/Slave and SATA Channel 1/2/3/4 Master
These categories identify the HDD types of 1 IDE channel installed in the com-
puter system. There are three choices provided for the Enhanced IDE BIOS:
None, Auto, and Manual. “None” means no HDD is installed or set; “Auto” means
the system can auto-detect the hard disk when booting up; by choosing “Manual”
and changing Access Mode to “CHS”, the related information should be entered
manually. Enter the information directly from the keyboard and press < Enter>:
1.4
Halt On
This category determines whether or not the computer will stop if an error
is detected during powering up.
1.3 Drive A
This option allows you to select the kind of FDD to be installed, including
[None],[360K, 5.25 in], [1.2M, 5.25 in], [720K, 3.5 in], [1.44M, 3.5 in] and
[2.88 M, 3.5 in].
Cylinder
number of cylinders
Head number of heads
Precomp
write pre-compensation Landing Zone landing zone
Sector
number of sectors
1.1
Date/Time
This item allows you to set up the desired time and date(usually as the
current time and date) with
Day—weekday from Sun. to Sat.
Month—month from 1 to 12
Date—date from 1
st
to 31
st
Year—year, set up by users.
Award (Phoenix) BIOS can support 3 HDD modes: CHS, LBA and Large.
Note: Set to [Auto] , the system can detect the hard disk and select the
HDD mode automatically when booting up. Suggest you select this option.
CHS For HDD<528MB
LBA For HDD>528MB & supporting LBA (Logical Block Addressing)
Large For HDD>528MB but not supporting LBA
PDF 文件使用 "pdfFactory" 试用版本创建