Foxconn A6VMX User Manual

Page 36

Chapter 2 BIOS Description

9.1

Supervisor/User Password

These items show supervisor/user password installed or not.

9.2

BIOS Write Protection

Enable this item to protect system BIOS from viruses.

9.3

Change Supervisor Password

Press “Enter” to change the supervisor password. The access rights and

permissions associated with the Supervisor password are higher than those of a
regular User password. The Supervisor password can be used to start the
system or modify the CMOS settings.Enter your password, not exceeding 6
characters, then press . The password you entered will replace any
previous password.If you do not want to set a password, just press
when prompted to enter a password.

9.4

Boot Sector Virus Protection

This item allows to protect boot sector of hard disk from viruses. The default

value is “Disabled”.

10.Load Optimal Defaults

This menu can let you load the optimal defaults set by BIOS, which have set the
optimized performance parameters of system to improve the performances of
system components.You can select or and then press
to load or not load the optimized defaults.

11.Save Changes and Exit

When you select this option and press , the following message will
appear in the center of the screen:

Save configuration changes and exit setup?

Press to save your changes in CMOS and exit the program; press
or to return to the main menu.

12.Discard Changes and Exit

If you select this option and press , the following message will appear
in the center of the screen:

Discard Changes and Exit setup?

Press to exit CMOS without saving your modifications; press
or to return to the main menu.

PDF 文件使用 "pdfFactory" 试用版本创建