Foxconn A6VMX - Manual (Page 24)

19
Chapter 1 Main Features
+5V
(Default)
+5VSB
KB/MSPWR
1
1
Keyboard and Mouse Jumper: KB/MS_PWR
This jumper allows you to enable or disable the Key-
board and Mouse wake-up feature. Set the jumper to
pins 2-3(+5VSB) to wake up the computer from sleep
modes when you press a key on the keyboard or click
the mouse, and a corresponding setting must be set
in BIOS as below:
Set “CMOS Setup”=>“Power Management Setup”=>
“Wake on PS2 Keyboard”and “Wake on PS2Mouse”
to “Enabled”.
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn