Foxconn A6VMX User Manual
Page 30
Chapter 2 BIOS Description
25
is The default value is “Auto”.If your CPU does not support frequency change.
This item will be grayed-out.
2.1.2 CPU/HT Reference Clock (MHz)
Use this item to set the CPU /Hypertransport frequency.
2.1.3 PCIE Graphics Clock (MHz)
This item allows you to set the frequency of PCIE Graphics card. The default
value is 100.
2.1.4 Spread Spectrum
Use this item to enable or disable the spread spectrum functions.
NOTE: The Spread Spectrum function can influence the EMI (Electromagnetic
Interference)degree.
2.6.1 CPU Voltage Control
Use this item to adjust the CPU core voltage manually. The voltage range
is +25mv~+800mv. “Disabled” is the default value.
2.6.2 DIMM Voltage Control
You are able to use this item to select the DIMM voltage.The voltage range
is +25mv~+600mv. “Disabled” is the default value.
2.6.3 NB Voltage Control
Through this item, you may adjust the North Bridge volatge manually.
2.6.4 Smart Power LED
Smart debug LED function within power LED. Enable this function, the power
LED status can show the system status of POST process. If it detect the
memory or graphics cards fail , the power LED will blink.
2.6 FOXCONN Feature
FOXCONN Feature Menu
3.Advanced BIOS Features
PDF 文件使用 "pdfFactory" 试用版本创建