Foxconn A6VMX User Manual
Page 28
Chapter 2 BIOS Description
23
Day—weekday from Sun. to Sat.
Month—month from 1 to 12
Date—date from 1
st
to 31
st
Year—year, set up by users.
Use
configure system time and date.
1.3 IDE Configuration
You may set configurations for the IDE device that you specify through this
item. Take “Primary IDE Master” for example, when you set “Type” to “Auto”,
please pay attention to the bellow warning.
1.4 Floppy A
This option allows you to select the kind of FDD installed, including [none],
[360K, 5
1
/4 in], [1.2M, 5
1
/4in], [720K, 3
1
/2 in], [1.44M, 3
1
/2 in] and [2.88 M, 3
1
/2 in].
1.5 System Memory
This item shows the system memory size.
1.6 Halt On
This category determines whether or not the computer will stop if an
error is detected during powering up.
1.7 Keyboard/Mouse/Floppy
This item allows system to detect if the Keyboard/ Mouse/ Floppy is available
automatically when booting.When set them to “Enabled”, BIOS will skip the
detection of the keybord, Mouse and Floppy.When set to “Disabled”,BIOS will
detect them.
After selecting the hard disk information into BIOS, use a disk utility,
such as FDISK,to partition or format the new IDE hard disk drives.
This is necessary so that you can write or read data from the disk.
Make sure to set the partition of the Primary IDE hard disk drives to
active.
Warning:
All Errors
Whenever the BIOS detects a nonfatal error, the
system will stop and you will be prompted.
All Errors But ......
All errors except keyboard,mouse and floppy can result
in system halt on. This requires you to set “Keyboard”,
“Mouse” and “Floppy” as “Enabled”.
PDF 文件使用 "pdfFactory" 试用版本创建