Foxconn K8M890M2MA-KRS2H User Manual
Page 43
Chapter 3 BIOS Description
36
v
Video Off Option
This option is used to set video off option.
v
Video Off Method
This option is used to define the video off method. “Blank Screen” mode
means that after the computer enters into power saving mode, only the monitor
will close, however, the vertical and horizontal scanning movement of the screen
continues. When you select the “V/H SYNC + Blank” mode the vertical and horizon-
tal scanning movement of screen stops when the computer enters power
saving mode. “DPMS Support” mode is a new screen power management
system, and it needs to be supported by the monitor you’re using.
v
MODEM Use IRQ
This option is used to set the IRQ in which the modem can use.
v
Soft-Off by PWRBTN
This option is used to set the power down method. This function is only valid
for systems using an ATX power supply. When “Instant-Off” is selected, press
the power switch to immediately turn off power. W hen “Delay 4 Sec” is
selected, press and hold the power button for four seconds to turn off power.
v
Run VGEBIOS if S3 Resume
This option is used to set Run VGEBIOS if S3 Resume.
v
Ac Loss Auto Restart
This option is used to set Ac Loss Auto Restart .
v
IRQ/Event Activity Detect
Press Enter to set IRQ/Event Activity Detect.
PDF 文件使用 "pdfFactory" 试用版本创建