Foxconn K8M890M2MA-KRS2H User Manual
Page 39
Chapter 3 BIOS Description
32
v
OnChip SATA
This option is used to enable or disable onchip SATA.
v
SATA Mode
This option is used to select SATA mode.
v
IDE DMA transfer access
This option is used to enable or disable IDE DMA transfer access.
v
OnChip IDE Channel 0/1
The integrated peripheral controller contains an IDE interface with support for
two IDE channels. Choose “Enabled” to activate each channel separately.
v
IDE Prefetch Mode
This option is used to enable or disable IDE prefetch mode.
v
Primary/Secondary Master/Salve PIO
These four items let you assign which kind of PIO (Programmed Input/Output)
is used by IDE devices. Choose Auto to let the system auto detect which PIO
mode is best or select a PIO mode from 0-4.
v
Primary/Secondary Master/Salve UDMA
UltraDMA technology provides faster access to IDE devices. If you install a
device that supports UltraDMA, change the appropriate item on this list to
Auto.
v
IDE HDD Block Mode
This option is used to set whether the IDE HDD Block Mode is allowed.
VIA OnChip IDE Device Menu
PDF 文件使用 "pdfFactory" 试用版本创建