Foxconn NF3GK8MA-RS - Manual (Page 60)

Chapter 5 NVIDIA RAID Introduction
Setting Up the BIOS
1. Start up the computer, then press Delete to enter the BIOS setup. Use the arrow
keys to select Integrated Peripherals, then press Enter.
2. Use the arrow keys to select the RAID Config, then press Enter.
3. From the RAID Config window, enabled the IDE RAID, the other items would be
light, then you can enable the disk that you want to use as RAID disks.
4. Press F10 to save the configuration and exit.
ＮＦ３ＵＫ８ＭＡ－ＮＦ３ＧＫ８ＭＡ－ｍａｎｕａｌ－Ｖ１．１．ｐ６５ 2005-3-16, 17:34 52