Foxconn 760GXK8MC - Manual (Page 34)

28
Chapter 3 BIOS Description
™ Security Option
When it is set to setup, a password is required to enter the CMOS Setup
screen; when it is set to system, a password is required not only to enter
CMOS Setup, but also to startup your PC, as well.
™ Boot Up NumLock Status
This item defines if the keyboard Num Lock key is active when your system is
started. The available setting values are: On and Off.
™
Typematic Rate Setting
If this item is enabled, you can use the following two items to see the typematic
rate and the typematic delay settings for your keyboard. The available setting
values are: Disabled and Enabled.
™
Typematic Rate (Chars/Sec)
Use this item to define how many characters per second a held-down key
generated.
™ Typematic Delay (Msec)
Use this item to define how many milliseconds must elapse before a held-
down key begins generating repeated characters.
™ Security Option
When it is set to “Setup”, a password is required to enter the CMOS Setup
screen; When it is set to “System”, a password is required not only to enter
CMOS Setup, but also to startup your PC.
™ HDD S.M.A.R.T Capability
This option is used to enable or disable hard disk S.M.A.R.T. support function.
The available setting values are: Disabled and Enabled.
™ Video BIOS Shadow
This option is used to enable or disable Video BIOS Shadow. If you enable
this option, the video BIOS will be copied to RAM. Video shadow will increase
the video speed. The available setting values are: Disabled and Enabled.
™ Small Logo (EPA) Show
This option allows you to enable or disable the EPA logo. The available setting
values are: Disabled and Enabled.