Irda connector: ir – Foxconn 760GXK8MC User Manual

Page 19

Chapter 2 Installation Instructions

Front Panel Connector: FP1

This motherboard includes one connector for
connecting the front panel switch and LED

indicator.

Hard Disk LED Connector (HD-LED)

The connector connects to the case’s IDE indicator LED indicating the activity
status of hard disks.

Reset Switch (RESET-SW)

Attach the connector to the Reset switch on the front panel of the case; the

system will restart when the switch is pressed.

Power LED Connector (PWR-LED)

Attach the connector to the power LED on the front panel of the case. The Power

LED indicates the system’s status. When the system is in S0 status, the LED is

on. When the system is in S1 status, the LED is blink. When the system is in S3,

S4, S5 status, the LED is off.

Power Swith Connector (PWR-SW)

Attach the connector to the power button on the front panel of the case. Pushing

this switch allows the system to be turned on and off rather than using the

power supply button.

HD-LED

RESET-SW

PWR-LED

PWR-SW

9 10

1 2

FP1

IrDA Connector: IR

The IrDA infrared transmission allows your com-

puter to send and receive data via an infrared

ray. The relevant parameters for the BIOS Inte-

grated Peripherals

should be set prior to using this function.

+5V

GND

IRRX

IRTX

Empty

This manual is related to the following products: