Foxconn K8S755M-6ELRS - Manual (Page 37)

29
Chapter 2 Installation Instructions
755/760A01 Series User Manual
Clear CMOS Jumper: CLS_CMOS
This motherboard uses the CMOS RAM to store all the set parameters. The
CMOS can be cleared by removing the CMOS jumper. How to clear CMOS?
1. Turn off the AC power supply and connect pins 1 and 2 together using the
jumper cap.
2. Return the jumper setting to normal (pins 2 and 3 locked together with the
jumper cap).
3. Turn the AC power supply back on.
Clear CMOS Jumper
Normal status
(default)
1
2
3
Clear CMOS
1
2
3
Warning:
1. Disconnect the power cable before adjusting the jumper
settings.
2. Do not clear the CMOS while the system is turned on.
755A01-032604.p65 2004-3-26, 15:28 29