Foxconn K8S755M-6ELRS - Manual (Page 35)

27
Chapter 2 Installation Instructions
755/760A01 Series User Manual
AGP Slot
This motherboard has an AGP slot that supports 1.5V AGP cards. AGP is an
interfacing specification designed to display 3D images. It provides a specialized
66Mhz, 32-bit channel to allow the graphic controller to directly access the master
memory and supports 4X and 8X speeds.
AGP Slot
Installing an expansion card
1. Before installing the expansion card, read the documentation that came
with it and make the necessary hardware settings for the card.
2. Make sure to unplug the power cord before adding or removing expansion
cards.
3. Remove the bracket opposite the slot that you intend to use.
4. Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
5. Secure the card to the chassis with the screw you removed earlier.
AGP Qualified Vendor List
The following table lists the AGP cards that have been tested and qualified for
use with this motherboard.
755A01-032604.p65 2004-3-26, 15:28 27