Foxconn K8S755M-6ELRS - Manual (Page 17)

9
Chapter 2 Installation Instructions
755/760A01 Series User Manual
CPU
This motherboard supports AMD ® Athlon64 processors with a 1600 MT/s band-
width and HyperThansport TM Technology.
1. Unlock the socket by pressing the le-
ver sideways, then lift it up to a 90 o
angle.
2. Align the cut edge to the gap in the
base of the socket. Carefully insert
the CPU into the socket until it fits in
place.
3. When the CPU is in place, press it
firmly on the socket while you push
down the socket lever to secure the
CPU. The lever clicks on the side tab
to indicate that it is locked.
Gap in the base
Installation of CPU
Follow these steps to install the CPU.
90 o
Push down the socket
lever to secure the CPU.
Cut edge
Attention:
The CPU pins must be properly aligned with the holes in the
socket, otherwise the CPU may be damaged.
755A01-032604.p65 2004-3-26, 15:28 9