Foxconn K8S755M-6ELRS - Manual (Page 36)

28
Chapter 2 Installation Instructions
755/760A01 Series User Manual
Jumpers
Users can change the jumper settings on this motherboard if needed. This
section explains how to use the various functions of this motherboard by chang-
ing the jumper settings. Users should read the following contents carefully prior
to modifying any jumper settings.
Description of Jumpers
1. For the jumpers on this motherboard, pin 1 can be identified by the silk-
screen printed “ ” next to it. However, in this manual, pin 1 is simply
labeled as “1”.
2. The following table provides some explanation of the jumper pin settings.
Users should refer to this when adjusting jumper settings.
Jumper Diagram Definition Description
1-2 Set pin 1 and pin 2 closed
2-3 Set pin 2 and pin 3 closed
Closed Set the pin closed
Open Set the pin opened
1
1
1
1
1
1
Note:
Make sure to use only the tested and qualified AGP cards
listed above. Other AGP cards manufactured by other ven-
dors may not be suitable for this motherboard.
Vendor Type Video Memory
MSI MS-GeForce 4 MX440 8X 128MB
ATI ATI Radeon 7000 64MB
UNIKA 7917 GeForce 4 MX 440 64MB
CP ATI 9500 8X 128MB
CP ATI 9600 8X 128MB
ASUS V7100 8X 128MB
ASUS V7700 8X 128MB
755A01-032604.p65 2004-3-26, 15:28 28