beautypg.com

Formax Cut-True 27S User Manual

Page 10

background image

7

7. Remove the blade change safety tool from the

tool box and screw the handles into the two holes

to the left and right of center (see photo). Screw

them in tightly, to prevent the blade from falling

out of the holder.

4. Turn the select switch to the middle and turn

off the power. Then lift the plexi safety cover to

remove the first screw from the right side of the

blade (A).

5. Close the safety cover and turn the select switch

to the left. Then turn on the power. The blade will

move up automatically. Turn the select switch to

the middle and turn off the power.

Center screw

A

B

C

D

6. Raise the safety cover and remove the first

screw from the left side (B). Remove the screws

to the left and right of center (C & D), but leave

the center screw in place.

NOTE: Do not remove the center screw.

3. Press two enable switches simultaneously to

move the blade down to the bottom position.