Formax FD 670 - Manual (Page 11)

7
14. Tear bar is adjustable to accommodate
characteristics of various forms. To adjust height bar
must be pushed to compress spring and lift out. Rotate
180 degrees (turned over) and replaced making sure
that square end of bar locks into brackets. (Fig. 9,
shown in HIGH position)
15. Set stacker wheel assembly so that stacker
wheels come to rest on proper form length indicated
on sequence stacker. (Fig. 6)
NOTE: When running forms at high speed, move
stacker wheels one notch furthertoward stacker grill
on stacker wheel adjustment rack. This will avoid jams
at jam grill.
16. Jog first form into sequence stacker to make
sure that sequence stacker wheels are just ahead of
leading edge of form.
17. Close safety covers. Machine is now ready to
burst. Press start button and adjust machine to
desired speed.
.