Formax FD 540 - Manual (Page 8)

6
CONTROL/FEATURE FUNCTION
Guide Wire Indicator Marks Indicates where the Guide wires are withing the
machine
Form Setting Indicator Enables the operator to quickly adjust the machine to
the proper form length.
Form Length Scale Form length can be measured in order to set the
carriage adjustment.
Adjustable Tear Points Applies pressure at the perforation to begin the burst.
Safety Cover Interlock Switch Cuts power to the speed control when safety cover is
opened. Machine will not run with the cover open.
Jam Detection Switch Cuts power to the motor instantaneously in the event
of a paper jam.
Stacker Wheel Assembly Controls forms coming out of the Burster in the Stacker.
Stacker Wheel Form Length Scale Form length can be measured in order to set the
Stacker Wheel Assembly.
Urge Roller Assembly Controls the vertical stacking of the forms on the
Stacker Grill.
Stacker Grill Provides a surface for the forms to vertically stack.