Formax FD 8904B - Manual (Page 8)

5
MAChiNE SPECiFiCATiONS
Machine designation: FD 8904B
Machine type: conveyor-belt paper shredder and Baler FD 8904B
Technical equipment: large feeding table, infeed conveyor belt, outfeed Baler
Cutting Data, Speed, Dimensions, Weight
Cutting Style: Cross Cut
Shred Size: 5/16” x 1-1/2” - 3”
Sheet Capacity: Up to 650
Speed: Up to 35 feet per minute
Feed Opening: 21”
Dimensions: 47” W x 129” L x 63” H Counterplate up
47” W x 149” L x 63” H Counterplate down
Feed Table Dimensions: 47” W x 23.5” D x 49.5” H
Space Requirements: 79” W x 200” L x 118” H
Bale Capacity: 154 lb compressed bale
Baler Pressing Power: 80.8 kN
Bale Size: 31” W x 22” L x 19” H
Bale Weight: 110 - 154 lbs. (material dependent)
Weight: 3,086 lbs.
Motor Specifications, Power requirements
1. Appropriate power receptacle must be available at installation site.
2. The FD 8904B is delivered in two crates. During transport, be aware of the
shredder’s high center of gravity.
3. The shredder can be moved on its casters. If a fork-lift is used to transport
the machine, be sure to use the designated pick-up points.
4. Install the shredder on a flat and even floor without carpeting.
5. Once the shredder is in place, lock the caster brakes, and plug in power
cable to appropriate power source.
Motor Type Horizontal Geared
Rated Power 7.5KW (10HP)
Operating Voltage 220/380V
Phase 3-Phase
Frequency 50/60Hz
Plug/Receptacle CS8365 plug included
CS8369 receptacle required
Rated Current 25.5A/14.7A
Output RPM 25 RPM/35 RPM
Number of Poles 4
Total Rated Power Pn 7.5KW
Total Rated Current In 26A
Total Fuse Protection 35A
Power Plug