Formax FD 8904B - Manual (Page 22)

Malfunction codes
Code Description Action
1000 Phase is missing / mains input Electrician! Check onsite fuses.
1010 Incorrect connection of phases / Wrong direct.
of rotation
Electrician! Check rotatory field
1100 Oil temperature too high Let oil cool down
1110 Sensing device for oil temperature defective Change sensing device - Contact Service
1200 Motor protective switch has swapped. Let motor cool down.
1211 Emergency-off is actuated Reset emergency-off pushbutton
1221 Hopper is open Close inspection flap
1231 Switch for Counter plate closed” defective “ Switch / Switching mechanism -> Contact service
1232 Counter plate not closed Close counter plate
1241 Limit switch Counter plate 90° open” defective “ Switch / Switching mechanism -> Contact service
1271 Supervising time Extend press ram” “ Contact service
1272 Supervising time Retract press ram” “ Contact service
1280 Counter plate not locked (induct. switch 0
signal)
Electrician! -> Contact Service
1281 Inductive switch counter plate (no signal change
while opening)
Switch / Switching mechanism -> Contact service
1300 Hardware defective Electrician! Contact service
1310 Short circuit output Master Electrician! Contact service
1320 Short circuit output Slave Electrician! Contact service
TrOuBLEShOOTiNG
If an error/ malfunction occurs in the bailer, the red light fault symbol is displayed. The baler switches off and
a corresponding error message is displayed, see list. The malfunction numbers appear in the error memory.
18