Formax 6202 Series - Manual (Page 16)

17
ENGLIS
H
When OMR is selected in a job, the job info
screen shows the OMR symbol.
The OMR settings
Via the job settings the OMR 1 menu can be
selected (see figure below). The OMR function
can be activated by selecting "Reading on" or
"Reading off". The upper feeder is selected
automatically for reading. When "OK" is pressed
with "Reading off" the “job settings” menu is
shown again.
When "OK" is pressed with "Reading on" the
OMR 2 menu is shown (see figure below). In the
OMR 2 menu the distance from the top of the
page to the first mark can be set, and the
maximum amount of documents in a set can be
chosen. When "OK" is pressed the “job settings”
menu is shown again.
It is not possible to put more than 5 sheets in
one set.