Formax 6202 Series User Manual
Page 13
14
• choose a higher job number,
• choose a lower job number,
• select the job to edit and confirm with "OK"
which will get you to the "job settings" menu
(1).
4.5
Job menu (2)
The job menu (2) shows the following functions
(see figure below):
To go back to the main menu (1) press "esc".
4.6
Copy job
The "copy job" menu shows the following
functions:
• job information,
• choose a higher job number to copy from,
• choose a higher job number to copy to,
• copy the job with "OK" which will get you to
the job menu (2).
In the "copy job" menu it is possible to save a
job executed with the Fill & Start function.
4.7
Delete job
This menu shows the following functions:
• job information,
• select a higher job number to delete,
• select a lower job number to delete,
• delete job with "OK" which will get you to the
job menu (2).
5.
JOB SETTINGS
To program a job use the following order (see
figure below):
1. envelope settings menu (
),
2. document settings menu (
),
3. fold settings menu ( ),
4. Double Feed Control (DFC) menu (
),
5. OMR menu (optional) (
),
6. job name menu (
).
Use key 1 or 2 to select a menu and key 3 to
edit the selection. Use key 4 to save the job.
5.1
Envelope settings
When the “envelope settings” menu is selected
the following choices are available (see figure
below):
1. envelope height ( ). The envelope height
can be set between 90 mm (3.5 inch) and
162 mm (6.38 inch).
2. no envelopes (
). To process without
envelopes (fold only).
5.2
Document settings
When the “document settings” menu is selected
the following choices are available (see figure
below):