Fluke Biomedical VT Mobile Getting Started User Manual
Vt mobile
Table of contents
Document Outline
- VT MOBILE Gas Flow Analyzer Getting Started Manual
- Introduction
- The Analyzer is a general-purpose, portable gas flow analyzer with special modes designed specifically for testing mechanical patient ventilators. The Analyzer measures bi-directional flow in both high and low ranges as well as high and low pressure ranges. Not for use in the patient environment.
- Unpacking the VT MOBILE
- Operation, Storage, and Maintenance
- Support
- Controls and Indicators
- Powering Up
- Selecting the Operating Mode
- Printing
- Setting Up
- Making a Measurement More Accurate
- Measuring Low Pressure
- Measuring Low Flow
- Measuring High Pressure
- Checking Ventilator Parameters
- Service
- Battery
- Specifications
- General Specifications
- Measurement Specifications
- Measurement Parameter Specifications
- Inspiratory and Expiratory Tidal Volume (VT)
- Expiratory Minute Volume (MV)
- Breath Rate (BPM)
- Inspiratory, Expiratory Time
- Peak Inspiratory Pressure (PIP)
- Inspiratory Pause Pressure (IPP)
- Mean Airway Pressure (MAP)
- Positive-End Expiratory Pressure (PEEP)
- Peak Expiratory Flow (PEF)
- Peak Inspiratory Flow (PIF)
- Inspiratory Time (Ti)
- Expiratory Time (Te)
- Display Screen
- Operational Modes
- Gas Types
- Serial Communications Specifications
- Symbols