Mx/qx configuration via dashboard – Flowserve MX Dashboard Limitorque User Manual
Page 9

9
FCD LMENIM2338-01
This section describes the available configuration options
applicable to the MX/QX. The below illustrations are applicable
to the offline and online modes.
Once in the Welcome screen below, proceed with the MX/QX
configuration detailed below:
In the OFFLINE mode, the following user access is available:
File > Exit – Exits the offline mode
Target > Compare – Allows for saved file comparison
Options > Download – Opens the MX/QX Downloader
application
Options > Modsim – Opens the Modsim application
NOTE: All other links are not accessible.
In the ACTIVE mode, the following user access is available:
File > Exit – Exit the online mode
Target > Config > Download – Downloads the MX/QX
configuration
Target > Config > Upload – Uploads a configuration to the
MX/QX
Target > Config > Compare – Compares the saved
configuration to the recently downloaded configuration
Target > Reset – Resets the MX/QX resulting in a lost link
Options > Download – Opens the MX/QX Downloader
application – IR OPTION only
Options > Modsim – Opens the Modsim application; can be
used with BT or IR
NOTE: All other links are for factory use only.
MX/QX configuration via Dashboard