Flowserve MX Dashboard Limitorque - Manual (Page 10)

10
FCD LMENIM2338-01
This section describes the options and data available using
the Dashboard application. Data includes Frequency Domain
Analysis (FDA), diagnostic information including motor
temperature, encoder status and firmware version information.
To access the detailed data, perform the following once a link
is established:
WARNING: For safety reasons, configuration changes require
REMOTE-STOP-LOCAL switch position in the “STOP” mode.
Press VIEW in the WELCOME screen and observe for below
operation.
The user has a choice of pressing ABORT; once the read cycle
is completed, the ABORT button changes to OK.
Once the register data download is completed, the next display
is as follows:
In the Configuration Selection, the end user has the option to
change the following parameters [COMMIT button saves the
desired changes]:
CONFIGURATION SELECTION OPTIONS: Configuration follows
menus in the MX/QX 10 MS. Consult 10M.
Valve setup
Allowed changes: CW (Clockwise to Close) or CCW (Counter
Clockwise to Close), Torque or Position seating.
MX/QX configuration Detailed