Flowserve MX Dashboard Limitorque - Manual (Page 12)

12
FCD LMENIM2338-01
status and Alarm configuration (relay) option
Allowed changes: S1-S2, R1-R8 – option dependent [allows for
installed relay changes involving Trigger and Action].
two speed timer configurations
Allowed changes: Timer Enabled/Disabled, Start and Stop
positions (in %), Pulse Time On (max 20 sec), Pulse Time Off
(max 200 sec), Open or Close.
Analog out configuration option
Allowed changes: Function (APT, ATT, Restricted), Output
(Current, Voltage), Offset (4-20ma, 0-20ma), Polarity (20ma-
OPEN, 20ma_CLOSE), Enable/Disable.
remote control configuration
Allowed changes: Modes; 2-wire OPEN, 2-wire CLOSE, 3-wire
INCHING, 3-wire MAINTAINED, 4-wire, Remote User Input,
type; Multi-Control Mode; Digital or Network or Analog control
[refer to the MX/QX LMENTB2300 documentation for detailed
information].