Flowserve LY Series Limitorque User Manual
Page 13

13
Limitorque LY Series: LY 1001, LY 2001 and LY 3001 FCD LMENIM1501-00 – 11/11
flowserve.com
2. If Torque Nut has been bored and keywayed by Limitorque, verify dimensions and keyway location
for proper compatibility with the valve stem.
3. If Torque Nut has not been bored and keywayed by Limitorque, it is provided solid (blank) to allow
customer to custom key and bore up to the maximum permissible sizes as listed in Table 5.1.
Table 5.1 – Mounting Base Dimensions
Unit Type and Size
Maximum Bore
inch (mm)
Maximum Keyway
inch (mm)
LY 1001
1-1/8, dia (28 dia)
1/4 x 1/8, (6 x 3)
LY 2001/3001
2-3/8, dia (60 dia)
5/8 x 1/16 (15 x 7.5)
NOTE: Before keywaying, match the Torque Nut with the Valve Stem to ensure proper keyway location. Use the
Keyway Index Mark (LY 1001 only) for locating appropriate keyway location.
Figure 5.2 – LY Keyway Locations
A
B
C
D
LY 1001 Keyway
Location Marks
D
A
B
C
Torque Nut
Stop Lug
LY 2001/3001 Keyway
Location Positions
- Tandem Seal (8 pages)
- 978 Chemiepac (12 pages)
- ISC2 Single Pusher Repair (8 pages)
- LS-300 Series Durametallic (4 pages)
- Pac-Seal Type 16 (8 pages)
- U Series BW Seals (4 pages)
- ISC2 Dual Pusher Repair (12 pages)
- ISC2 Single metal bellows seal (8 pages)
- Durametallic Double CRO (8 pages)
- VRA-C Series Durametallic (4 pages)
- ISC2 Dual metal bellows sea (12 pages)
- Single Inside Pusher Type Seal (8 pages)
- Bearing Gard (2 pages)
- X-200 (12 pages)
- GTS Series (12 pages)
- MSS Series (12 pages)
- SLC Series Interseal (12 pages)
- QB Series BW Seals (8 pages)
- SLM-6100 (12 pages)
- SLM-6200 (12 pages)
- High Temperature Metal Bellows Seals (8 pages)
- X Series BW Seals (8 pages)
- ML-200 Series Durametallic (8 pages)
- ML-200 Series Durametallic (8 pages)
- Circulator (12 pages)
- ISC Series (16 pages)
- Gas Barrier Control System (4 pages)
- CPM Series (8 pages)
- CPM Series (12 pages)
- Mechanical Seal and Seal Support System Storage (4 pages)
- RIS Seal (12 pages)
- 682 Seal Cooler (8 pages)
- ISC2 Series (8 pages)
- ISC2 Series (116 pages)
- Pac-Seal Type 52 (8 pages)
- Pac-Seal Type 31 (8 pages)
- ST Series (8 pages)
- Mechanical Seal General (16 pages)
- Dual Pressurized Seals (8 pages)
- Uniseal Series BW Seals (8 pages)
- XLC Series (8 pages)
- PSS II Durametallic (8 pages)
- PSS II (16 pages)
- ISC1SX (8 pages)
- ISC1PX (8 pages)