Flowserve MX-100 Field Unit - Manual (Page 65)

65
MX/DDC-100 Field Unit Installation and Maintenance FCD LMENIM2329-01 – 03/11
flowserve.com
Limitorque Tasks
Deliverable From To Comments
Specifications Engineer Limitorque
Provide specification on Motor-Operated Valves, other DDC-100 Field Units (I/O
Modules). Provide P&IDs
Schedule Contractor Limitorque
Provide material delivery dates for hardware. Schedule Flowserve Limitorque
Controls Service Technician for actuator commissioning
Site Preparation Contractor Limitorque
Install specified equipment, cables for power, and network communication. Verify
all network and power cables are properly routed, terminated, and documented
prior to commissioning of DDC-100 Network. The contractor should provide
detail on network routing from Host system to each field unit. Verify all field units
are properly grounded
Operational S.I. Limitorque
Provide unique field unit requirements to Controls Service Technician
Requirements prior to start of field unit commissioning process. Include: ESD
requirements, open/close service or position control (“move-to”), digital inputs/
outputs, analog inputs
Tag List S.I. Limitorque
Provide a tag list detailing valve tag name to network address. This will allow the
Limitorque Controls Service Technician (when requested according to purchase
order) to properly address the actuators to the developed Host software
Sales Support Limitorque Engineer Information on Limitorque products
Manuals Limitorque
S.I.
Engineer
Contractor
Product Bulletins for Actuators:
• LMAIM4019 Direct-to-Host Programming Guide
• LMAIM1329 Accutronix Installation and Operation for MX-DDC Field Unit.
• LMAIM4029 DDC-100 UEC Field Unit (Modbus) Installation and Operation
Manual
• LMAIM4030 DDC-100 UEC Field Unit Installation and Commissioning Manual
• LMAIM4022 DDC-100 UEC Field Unit Wiring and Startup Guidelines
• Modicon Modbus Protocol Reference Guide PI-MODBUS-300 Rev. G (available
from Modicon)
Hardware Limitorque Contractor
Provide Motor-Operated Valves, RS-232/485 converters (if supplied), OEM
valves, mounting adapters, etc.
Field Unit
Startup
Limitorque Contractor According to purchase order requirements, when scheduled