Flowserve PMV P4 - Manual (Page 38)

Approvals EP5-IS
(I/P-converter with white label)
WARNING!
Installation of any hazardous area equipment should be made in accordance with
hazardous area installation codes and also of course to the installation to the installation
and operating instructions provided. The manufacturer cannot be held responsible for
incorrect installation or any customer modifications to, or repair of, a certified instrument
as this may invalidate the certified design. If a certified instrument shoult fail, no attempt
should be made by the user to effect repair. The unit should be returned to the factory.
WARNING!
These instruments must be installed in accordance with local and national codes of
practice, especially for hazardous area installations. The instruments are fully isolated
from ground and therefore grounding is unnecessary for functional purposes.
However, grounding may be necessary to conform to installation codes.