6 repair – Flowserve High Temperature Metal Bellows Seals User Manual

Page 8

TO REORDER REFER TO

B/M #

F.O

To find your local Flowserve representative

and find out more about Flowserve Corporation,

visit www.flowserve.com

FIS113eng ORG 10/13 Printed in USA

flowserve.com

Flowserve Corporation has established industry leadership in the design and manufacture of its products. When properly

selected, this Flowserve product is designed to perform its intended function safely during its useful life. However,

the purchaser or user of Flowserve products should be aware that Flowserve products might be used in numerous

applications under a wide variety of industrial service conditions. Although Flowserve can provide general guidelines,

it cannot provide specific data and warnings for all possible applications. The purchaser/user must therefore assume

the ultimate responsibility for the proper sizing and selection, installation, operation, and maintenance of Flowserve

products. The purchaser/user should read and understand the Installation Instructions included with the product, and

train its employees and contractors in the safe use of Flowserve products in connection with the specific application.

While the information and specifications contained in this literature are believed to be accurate, they are supplied for

informative purposes only and should not be considered certified or as a guarantee of satisfactory results by reliance

thereon. Nothing contained herein is to be construed as a warranty or guarantee, express or implied, regarding any

matter with respect to this product. Because Flowserve is continually improving and upgrading its product design,

the specifications, dimensions and information contained herein are subject to change without notice. Should any

question arise concerning these provisions, the purchaser/user should contact Flowserve Corporation at any one of

its worldwide operations or offices.

6 Repair

This product is a precision sealing device. The design and dimension tolerances

are critical to seal performance. Only parts supplied by Flowserve should be used

to repair a seal. To order replacement parts, refer to the part code and B/M

number. A spare backup seal should be stocked to reduce repair time.
When seals are returned to Flowserve for repair, decontaminate the seal

assembly and include an order marked "Repair or Replace." A signed

certificate of decontamination must be attached. A Material Safety Data

Sheet (MSDS) must be enclosed for any product that came in contact with

the seal. The seal assembly will be inspected and, if repairable, it will be rebuilt,

tested, and returned.

USA and Canada
Kalamazoo, Michigan USA
Telephone: 1 269 381 2650
Telefax: 1 269 382 8726

Europe, Middle East, Africa
Roosendaal, the Netherlands
Telephone: 31 165 581400
Telefax: 31 165 554590

Asia Pacific
Singapore
Telephone: 65 6544 6800
Telefax: 65 6214 0541

Latin America
Mexico City
Telephone: 52 55 5567 7170
Telefax: 52 55 5567 4224