Flowserve MENBLOC - Manual (Page 32)

MENBLOC USER INSTRUCTIONS ENGLISH 71576296 - 02/13
Page 32 of 40 flowserve.com
Push
Screw and lock with locking compound
Fig. 1 Direct installation of electric motor on
MENBLOC with an added pump shaft
6.7.2 Mechanical seal assembly
The mechanical seal assembly does not need any
particular adjustment. The correct setting is
ensured by a clear support of the mechanical seal
seat on the impeller hub. The stationary seal ring
is set with the help of the tube and the rotating
seal ring, is set with the help of the assembly cone
and the tube.