Fire Magic Choice Post Grills C430s - Manual (Page 19)

19
Fig. 19-1
Left
main burner
control knob
Right
main burner
control knob
Drip
Tray
C430s controls
Control panel
screw(s)
Battery box
View from under right shelf
This grill comes with two (2) rigid shelves that must
be attached. These can be attached using the four
support screws provided and a Phillips-head screw
driver.
Important: Take caution to not cross-thread
when tightening the screws.
1. Insert the top two screws into the side of the
barbecue and screw them in about half way.
2. Line up the larger, bottom portion of the two
keyhole openings with the two top screws
and fi t the two keyhole openings over the
two screws. With the shelf pushed all the way
against the side of the barbecue, lower the
shelf so that the screws lock into the narrower,
upper portions of the keyholes.
Note: The shelf will now stay in place on it’s
own.
3. Insert the bottom two screws into their holes
and tighten them all the way.
4. Finally, tighten the upper two screws, completely.
To detach, reverse the process above.
RIGID SHELF INSTALLATION
Shelf support screws
IDENTIFICATION OF GRILL CONTROLS