Fenix ECOFILM SET - Manual (Page 3)

3
ECOFILM SET Total output Length of film strip Resistance Total film width Active heating film
TYPE [W] [m] [Ω] [m] width [m]
Eset 60 - 0,6x1,5m/ 50W 50 1,5 1058 0,6 0,55
Eset 60 - 0,6x2m / 66W 66 2 801,5 0,6 0,55
Eset 60 - 0,6x2,5m/ 83W 83 2,5 637,3 0,6 0,55
Eset 60 - 0,6x3m/ 99W 99 3 534,3 0,6 0,55
Eset 60 - 0,6x4m/ 132W 132 4 400,8 0,6 0,55
Eset 60 - 0,6x5m/ 165W 165 5 320,6 0,6 0,55
Eset 60 - 0,6x6m/ 198W 198 6 267,2 0,6 0,55
Eset 60 - 0,6x8m/ 264W 264 8 200,4 0,6 0,55
Eset 60 - 0,6x10m/330W 330 10 160,3 0,6 0,55
Eset 80 - 0,6x1,5m/ 66W 66 1,5 801,5 0,6 0,55
Eset 80 - 0,6x2m/ 88W 88 2 601,1 0,6 0,55
Eset 80 - 0,6x2,5m/ 110W 110 2,5 480,9 0,6 0,55
Eset 80 - 0,6x3m/ 132W 132 3 400,8 0,6 0,55
Eset 80 - 0,6x4m/ 176W 176 4 300,6 0,6 0,55
Eset 80 - 0,6x5m/ 220W 220 5 240,5 0,6 0,55
Eset 80 - 0,6x6m/ 264W 264 6 200,4 0,6 0,55
Eset 80 - 0,6x8m/ 352W 352 8 150,3 0,6 0,55
Eset 80 - 0,6x10m/ 440W 440 10 120,2 0,6 0,55
Eset 80 - 1,0x1,5m/ 117W 117 1,5 452,1 1 0,97
Eset 80 - 1,0x2m/ 156W 156 2 339,1 1 0,97
Eset 80 - 1,0x2,5m/ 195W 195 2,5 271,3 1 0,97
Eset 80 - 1,0x3m/ 234W 234 3 226,1 1 0,97
Eset 80 - 1,0x4m/ 312W 312 4 169,6 1 0,97
Eset 80 - 1,0x5m/ 390W 390 5 135,6 1 0,97
Eset 80 - 1,0x6m/ 468W 468 6 113 1 0,97
Eset 80 - 1,0x8m/ 624W 624 8 84,8 1 0,97
Eset 80 - 1,0x10m/ 780W 780 10 67,8 1 0,97
Supply density
[W/m 2 ]
60
60
60
60
60
60
60
60
60
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
ECOFILM SET – Floor Heating Film
• The heating film includes two SK AV connecting cables 1.5 mm 2 , 5 m long
• 230 Volts
1. Installation Conditions
•
Other use of the heating foil or other placement of the heating foil
than is mentioned in these instructions can be hazardous to health
and life or can cause material damage. Warranty conditions do not
apply to such use.
•
The heating foil is designed for dry- process laying; it isn’t glued but
it must be fixed to prevent moving/slipping beyond the nonheating
edges.
•
The heating film must not be installed on irregular surfaces. The
heating film must be protected against damage during installation
(e.g. damage of insulation with sharp objects, walking in unsuitable
footwear etc.). It is only possible to walk in shoes with a soft sole on
the heating film placed on a flat and smooth surface.