Feelworld FW56D/O - Manual (Page 10)

9
2．Power input way
There are some ways to supply the power of the monitor.
2.1 The power supply by the adapter. 12V/1.0A is optional DC voltage changer,
insert DC power input interface directly. It can be choosed qualified adapter
which current with output voltage DC 6～15V, output capacity >10W by
customers
Please note the input polarity is Positive with respect to, otherwise will
damage the monitor!
Please use the adapter attached in the accessories. If necessary to use
other specifications adapter, please note to provide the qualified adapter
which power supply should be not less than 10W (DC6V-24V)
2.2 Another option of power source is using batteries. The product back case
including battery slots are available for three types of batteries. Customers
can choose different battery slots according to their needs.
2.3 The monitor can be powered by Anton power cable and camera, when
powered, please note the DC plug power polarity. The monitor input
polarity is Positive with respect to
3. Operating instruction（When operating，the monitor should
be powered on in the working state）
3.1 Panel shortcut button function operation
CAMERA Canon 5D mode button(camera mode is recording, full Ⅱ
display on monitor, No delay, No deform)
MODE Input signal switch, VIDEO、HDMI input signal switch
∧ When displaying meun item, up to select adjust button. Under
NO menu state, focus assist shortcut button
∨ When displaying meun item, down to select adjust button.
Under NO menu state, to switch color/black and
white/
monochrome
MENU Menu key, pop up or close menu
＞ Volume adjust confirm button, before volume adjust, press this