Faronics WINSelect Enterprise - Manual (Page 10)

10
Installing/Upgrading WINSelect on a Workstation via Faronics Core Console
You can install WINSelect on a workstation via Faronics Core Console. If you recently purchased an
upgraded version of WINSelect, you can upgrade via Faronics Core Console.
To install/upgrade WINSelect, select a single workstation or multiple workstations, click Configure
Workstations in the right pane and select Advanced > WINSelect>Install/Upgrade WINSelect.
The WINSelect dialog appears. Enter and confirm the Password. Click Install WINSelect.
Applying the License on a Workstation via Faronics Core Console
If you are using the evaluation version of WINSelect, you can apply the license and convert it to a full
version. Faronics WINSelect License can be applied via Faronics Core Console. Complete the following
steps to apply License:
1. Launch Faronics Core Console.
2. Right-click the Core Server and select Properties.
3. Click the WINSelect tab. The WINSelect tab displays the Version, License Key (if it is a Licensed
Version), and License Expiry.
4. To reboot the computer after the user session, select the Reboot computer after user session
finishes check box.
5. Click Edit and enter the License Key in the License Key field.
6 Click Apply. Click OK.
Faronics Licensing works as follows:
• The Core Server (a component of Faronics Core) automatically pushes the License Key to the
workstations where Faronics WINSelect Client is installed (if the computers are offline, the
License Key is applied once the computers are back online).
• The License Key cannot be manually edited at the workstation.
If the License Key was entered while installing the Loadin, it is not necessary to enter it again in
the Properties tab.
Installing WINSelect Manually on a Workstation
When installing the WINSelect Loadin, the WINSelect workstation installer files are unpacked in the
C:\Program Files\Faronics\Faronics Core\Loadins\WINSelect\Workstation Installer directory. To install
WINSelect on a workstation, double-click WINSelect_Ent_32-bit.msi on a 32-bit operating system.
To install WINSelect on a workstation manually, do the following: