Acoustic noise emission information – Dell OptiPlex FX160 User Manual
Page 20
DELL™ OPTIPLEX™ FX160 TECHNICAL GUIDEBOOK
20
ACOUSTIC NOISE EMISSION INFORMATION
OPTI PLEX FX160
Component
Typical Configuration
High-end Configuration
CPU
Intel Atom 230 Processor (1.6GHz, 512 L2
cache, 533MHz FSB)
Intel Atom 230 Processor (1.6GHz, 512 L2
cache, 533MHz FSB)
Memory2
1 GB DDRII 667MHz
4 GB4 DDRII 800MHz
HDD (#, capacity)
NA
80 GB4 7200 RPM SATA
NVRAM (#,capacity)
1GB
2GB
WLAN
NA
1510 Half Mini-card
Graphics Adapter
Integrated Adapter
Integrated Adapter
The Declared Noise Emission in accordance with ISO 9296 for the Dell OptiPlex 160 is as follows
1,2
:
(all values L
WAd
expressed in bels; 1 bel=10 decibels, re 10
-12
Watts)
Operating Mode
Typical Configuration
Declared Sound Power (L
WAd
)
High-end Configuration
Declared Sound Power (L
WAd
)
Idle
1.8
4
2.7
HDD Operating
NA
2.7
90% CPU
1.8
4
2.7
The Declared A-weighted Sound Pressure Level in decibels (re 2x10
-5
Pa), at Operator, Bystander, and Desk Side Positions are
measured in accordance with ISO 7779 7.6.1, 7.6.2, and C.15.2 and declared in accordance with ISO 9296 for this product is as
follows
1,3
:
Operating Mode
Typical Configuration
Declared Sound Pressure (L
pA
)
High-end Configuration
Declared Sound Pressure (L
pA
)
Operator Position (L
pA
)
Bystander Position (L
pA
)
Operator Position (L
pA
)
Bystander Position (L
pA
)
Idle
12”
11*
16
13
HDD Operating
NA
NA
16
13
90% CPU
12*
12*
16
14
1
All tests are conducted according to ISO 7779 and declared according to ISO 9296 except 90% CPU. For this mode, the system
CPU was stressed at 90% utilization with no other peripheral device actively seeking. This test mode is not specified in ISO
7779, but was measured using the same microphone distances and measurement techniques defined for the other reported
operating modes.
2
Declared Sound Power rounded to nearest tenth of a bel per ISO 9296 section 4.4.2
3
Declared Sound Pressure rounded to nearest dB per ISO 9296 section 4.4.3.